Shopping Cart

Your cart is empty.

Your cart is empty.

7-Pin Electronic LED Flasher Relay Module for LED Blinkers on Select Suzuki Motorcycles - ELFR-1-U

Free shipping on orders over $29.99

$31.99

$ 13 .99 $13.99

In Stock

About this item

  • Maintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers.
  • Plug and Play connectivity with OEM connector (see compatibility list on Custom LED's company website)
  • Near zero initial turn-on delay (other LED relays delay when signals are first engaged).
  • Guaranteed to work for blinker Loads of 0.05A to 10A! That covers almost ANY LED or non-LED blinker on the market!
  • 1-year Warranty & Satisfaction Guarantee


Now you can finally fix the flash rate on your Suzuki motorcycle with our unique Plug And Play solution! That's right, our Electronic LED Flasher relay directly replaces the stock flasher relay on select Suzuki motorcycles by plugging directly into the harness in place of the OEM flasher relay module! See the compatibility list on Custom LED's company website for bikes that are known to be compatible. Visually compare the flasher relay on your motorcycle with the product pictures before ordering. This unit is guaranteed to operate at the normal DOT blink rate for compatible motorcycles with stock blinkers, LED blinkers, or any combination of both, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) - which basically covers the majority of blinker products on the market! In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems. These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps. Problems such as, but not limited to: the 4-way blink problem (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in "blinker mode" due to non-zero blinker voltages. Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle. Remember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.


Worked like a charm on my 2013 with 5900k miles
Reviewed in the United States on August 11, 2024
Seems to be much higher quality than what I replaced with. Very happy
Stuart
Reviewed in the United States on July 10, 2024
Bought this one after reading some generic relays caused issues with other Suzuki M owners. This one works great and no issues to report. Went full LED on signals with front switchbacks that stay white when in normal use. Was a great upgrade!
Jamie McCulloch
Reviewed in the United States on January 8, 2024
I use it for running LED lights on my motorcycle
Deborah Bence Boerema
Reviewed in the United States on January 26, 2024
No more hyper blinker on my 05 wee strum
Eric D. Holbrook
Reviewed in the United States on September 22, 2023
I ordered the cheapest flasher relay and got what I paid for. The flash rate was way too slow for the sequential LED signals I put on my Suzuki M109R. This relay brought the flash rate up where it needed to be.
Triton
Reviewed in the United States on January 24, 2023
Installed in seconds and works great. I had bought one prior to this one from a different company that didn't work. But this one fixed my fast flashing and made my LED turn signals function properly.
Rob
Reviewed in the United States on May 24, 2021
Came in on time and worked perfectly!!! Saved my butt. Changed and added several LEDs on my 2004 Suzuki intruder VL1500 and they speed flashed. This fixed the issue!
Fabriano
Reviewed in the United States on November 1, 2021
Work seamlessly, completely plug and play. Very happy with this product. Sorted my Bking's hyperflash.