Your cart is empty.
Your cart is empty. AWT-WL007H12 light strip clips for 10mm/12mm wide IP67 waterproof led strip lights,
which are upgrading designed,Repalce traditional two screws clips, soft silicone clips.
Compared with traditional LED Strip mounting clips have follow advantage:
1. One-side screw can reduce the installation time and difficulty. And, the led strip light can be installed on a narrow surface and more closer to the edge of the surface.
2. Widen the press area between the clips and the light strip, so the clips ensure the levelness and can press the strip light more tightly.
3. Hollow height only 3.5mm/0.138inch (old one is 4.0mm). The tightness can be controlled by twisting the screw as required.
4. Pure PC transparent: light transmittance from 86% increase to 98% ,more easy to hide in plain sight,while ensuring that the
brightness and color temperature of the light remain unchanged.
Note: Before buying light hanger clips, please kindly check up your led strip width and height.
1.Suit for 10mm/0.39 inch and 12mm/0.48 inch IP67 silicone tube led strip light which is DC12V/24V input.The sealing height
of the IP67 Silicone tube are not higher than 3.8mm/0.14 inch.(Silicone seal is elastic),The number and type of LED beads do not affect the use.
2.Don't fit for IP20/IP44/IP65 led strip light and.
Installation:
1.Before installing the clips. Please use drill tools punch holes in cement wall/tile wall/thick metal surface and make the markings.
For wood/thin metal surface no need puch holes in advance.
2.Putting screws through the clips and then fixed the screw in the marked mounting holes.
3.Adjust led strip and tighten the screw until the clip completely hold the light strip.
4.Check and good job.
suggest 3-5 pieces clips within 1 meter strip lights.
Package Including:100pcs clips and 102pcs screws