Your cart is empty.
Your cart is empty.4.3 out of 5 stars
A premium do-it-yourself antler mounting kit made from solid oak and finished with satin lacquer. So this is your time to shine, to show off the result of your hunting prowess. The crest plaque has a simple rounded edge that will enhance the look of the mount. Each kit comes with a velvet look antler cover; gold braid to wrap the antler bases; mounting hardware and easy to follow instructions. Cover color may vary from what's depicted. The assembled size is approximately 12-inches by 9-inches by 2.63-inches. This kit works with Whitetail and Mule deer. Proudly made in Wisconsin, USA.
Customer
Reviewed in Canada on March 6, 2025
Awesome
Andrew Martin
Reviewed in the United States on February 19, 2025
I've bought 5 of these so far. They are very easy to do, I use a hot glue gun for the rope piece. I love how they look every single one of them bless my house and make it look very clean and beautiful. Will always buy these from now on.
RJU
Reviewed in the United States on January 12, 2025
Mounted my deer antlers. Look great. Easy to use.
Customer
Reviewed in the United States on September 17, 2024
With the cost of everything through the rood now, it is nice to find a product that is affordable and of great quality. The wooden plaque is very pretty and is heavy duty. It came with everything you would need to put your antler mount together and it look great. The velvet cap is a pretty shade of tan, the braided ropes are nice, and it comes with the hangers, tacks and screws. I can't be anymore happy than I am.
mark h.
Reviewed in the United States on July 20, 2024
Most everything is good except the cord to tie around antlers they are too thick. I had to take one strand off of the three that's together so it wouldn't cover the antlers then you can't burn this type so ends don't unravel. Had to use piece tape which it tells you but it's harder to do and don't look as good. Wood is nice and leather that goes in middle is good thick stuff.
Athena Price
Reviewed in the United States on June 7, 2024
Much nicer then my other mounts. I do love the fact that it's real oak. Looks good on the wall.
Corey
Reviewed in the United States on February 11, 2024
I’d ordered another kit and discovered it was plastic. This one is real wood, and a nice cover piece. The cover is a little hard to cut, but once you’ve got it started it’s not too bad. I didn’t measure, I just held the cover to the horns and marked then cut small, tested and trimmed until the fit was good. All told it took maybe 20-30 minutes to complete.
Abdul
Reviewed in Canada on December 14, 2024
Great product.
Sophie
Reviewed in Canada on January 1, 2024
The wood is very orange and doesn’t look like the picture.
Faedrus
Reviewed in Canada on November 2, 2023
It has directions but I just eyeballed it and it worked. The golden lace has three parts interwoven that Frey when you cut it to size. I just tucked the freyed part behind the antler and used a hit glue gun to secure it in place. When cutting the velvet, cut a little and then try it on each time so you don't too much. Due it slow. The velvet is thick and stiff so I used tinsnips. Have fun!
Jeffrey Dereume
Reviewed in the United States on November 16, 2023
This worked pretty well for some old antlers I had in a box. I did 2 and second was way better than first. I ended up skipping the instructions on measuring for where the holes for the antlers would be and just held the rack up to it and marked with pencil from the back. Start at the edge and slowly cut more and more inward until the velvet fits over the skull and sits flush with the wood. This will ensure there’s less of a gap to cover with rope.
Kevin
Reviewed in the United States on January 8, 2023
This mount is very nice. I used a different plaque only because I already had one that my uncle made by hand. The plaque that comes with it is nice. I will say that cutting the holes is no so straight forward. I read the instructions like 5 times and then ended up just freestyling it and I made some mistakes. Was able to cover up the mistakes with the rope but just barely. Hot glue made the rope easy. Another custom thing I did was add the cartridge end punched into the bottom of the felt scull cap and into the plaque.
JZ
Reviewed in Canada on January 15, 2020
Excellent product, wood is great quality, directions could be a bit better but not difficult to figure out
Recommended Products
$36.32
$ 16 .99 $16.99
$49.90
$ 22 .99 $22.99