Shopping Cart

Your cart is empty.

Your cart is empty.

Peltier Module DIY Thermoelectric Cooler Refrigeration Air Cooling Device 4-Chip TEC1-12706 12V 288W Peltier Cooler Semiconductor Water Chiller TEC

Free shipping on orders over $29.99

$37.79

$ 18 .99 $18.99

In Stock

About this item

  • Applies for Small Area Cooling: This Peltier Module suitable for small space cooling, semiconductor refrigeration learning theory, research solutions developed cooling equipment planning
  • Working Principle: Air cooling device, not used to cool the water, use water to dissipate heat, and eventually the water hot, not cold
  • Easy to Operate: This kit a finished product that does not need to be assembled, Simple , cooling quickly, outstanding performance
  • Offers Stable Performance: Stable work and low noise, no vibration, no refrigerant required
  • Working Range: Suitable for 20L space cooling, air temperature can be cooled to 5-8 degrees than normal



Product Description

1

Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions developed cooling equipment planning

Air cooling device, not used to cool the water, use water to dissipate heat, and eventually the water is hot, not cold

This kit is a finished product that does not need to be assembled

Stable work and low noise, no refrigerant required

Suitable for 20L space cooling, air temperature can be cooled to 5-8 degrees than normal

2

Specifications:

Maximum power: 288W (15.4v)

Maximum current: 24A

Rated voltage: DC 12V

Rated current: 17A

Refrigeration power: 170W

Product size: 180* 65 * 62mm/7.09*2.56*2.44

3

Package Included:

1 x Thermoelectric Cooler(have assembled)

This cooler kit included:

4 x 40*40mm fan

1 x Cooling block

1x Water Block

3 sets x fixtures

1 set x screw(6 pcs screws + fan screws 16pcs),

4 x TEC1-12706

3

Note:

1. That we sell is finished product,don't need to assemble.

2. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.


Customer
Reviewed in the United States on September 14, 2023
I wish that I had found this before I started buying parts for my experiment. I still have all the parts in a box still waiting to be assembled.things that i would add to this kit would be some wago wire connectors.I would verify the watts needed to power this unit. My calculations show that 288 watts is to run the peltier chips alone at 12v and 6 amps. That is not including the minimal draw of the fans,for the same reason my project is setting on the sidelines yours may be too. Trying to find a power supply for this device once you add a pump you will need about 300 watts per hour. to keep it portable that would be about a 360 ah battery.Hopefully they used a good thermal paste to connect the chips to the cooling system, but they did not mention in the description. If your looking to build your own cooler dehumidifier for a experiment it looks like a great place to start.
Recommended Products

$19.49

$ 8 .99 $8.99

4.8
Select Option