Your cart is empty.
Your cart is empty.4.2 out of 5 stars
- #1,592 in Camera Batteries
Nice Value Rechargeable Ni-Cd Batteries
These NiCd batteries are high performance rechargeable batteries. The standard voltage of 1.2V is perfect for a wide range of small and medium sized electronic devices, and 2200 mAh is used to meet the equipment's power needs over long periods of time. There are soldering tags on both ends of the battery, which are ready to rebuild the battery pack. You just need to replace the old battery pack to get the electronics to work again as if they were new.
We are responsible for the quality of each battery
Only when we confirm that all batteries are safe and meet international standards will they be packaged. Every three months we take samples from stock for testing. Discard substandard and expired batteries. This is to ensure that every customer who uses the battery is free from the harm of inferior products.
We also care about the environment
The minimum times of charges is 500 times to save raw material resources, and you don't have to buy new batteries as often - saving money.
Please note: Make sure the battery of the electronic device is 4/5 Sub C rated before purchase.
TW
Reviewed in the United States on June 4, 2025
They don’t hold a charge very long.
SmartHomeDIYer
Reviewed in the United States on June 23, 2025
I never took the time to realize that I could open up a rechargeable tool and replace the batteries instead of trashing it and buying a new tool. This has saved me a lot of money. I have a very cheap, rechargeable, handheld jigsaw. This is the kind of tool that you only use for certain small jobs but it works very well for those certain small jobs. It stopped charging no matter how long it was plugged in but it would work while plugged in. It shouldn’t be used while charging but that let me know the issue was likely the batteries. I opened it up and saw that the way the batteries were arranged to fit into the handle was devotedly not something that was going to be found pre-made. This little jigsaw has not been manufactured in well over a decade and parts have dwindled to nonexistent at best. No worries. I bought the batteries and some little tabs to connect them. Being a newbie and being a great at soldering, I connected the batteries in the correct arrangement by soldering them. Hey, I’m new to this. I didn’t know better yet, I’ve since discovered the correct method of connecting the batteries would be to spot weld them. I will definitely invest in a new, small battery tab spot welder prior to my next battery pack replacement. You live and learn and I’m happy to have learned a lot during reviving this cheap handheld rechargeable jigsaw. Next, I plan to try my hand at re-powering some worn out Mikita batteries. Those things are ridiculously expensive. Yay, I get to shop for a new tool and learn to properly use a spot welder. Retirement is great! I’ve been using these batteries for a long time and they have been recharged a dozen times without any issues. These high quality batteries are well made and have proven to be worth the purchase. I will buy more myself and I would recommend them to any family or friends looking to re-power over re-purchasing their expensive rechargeable tools, toys and gadgets.
S. Steven Smith
Reviewed in the United States on January 4, 2025
I'd purchased another Ni-Cd battery set that I had to return as I didn't measure the size right so I didn't make that same mistake with this purchase, and their size specs were spot on so it fit the small handheld screwdriver I was aiming to repair perfectly. Voltage measured 1.2V from the package and once installed, I charged them up since they are Ni-Cds which have a battery voltage memory issue, so I'm hoping they will work fine. Giving 4 stars due to very flimsy terminal metal, which is welded onto the batteries at four points, but would have liked to see just a bit more thickness on those.Otherwise, the repaired device is now working so it appears so far, so good.
David Glasscock
Reviewed in the United States on April 1, 2025
Used to rebuild the battery pack in an old drill driver. Seems to work as good as or better than new.
Don in Dallas
Reviewed in the United States on July 17, 2024
Fixed my Remminton beard trimmer that was 6 years old. Old battery charges and runs 30 seconds and dies. Runs 10 minutes or more like original. Had to solder the tabs but any solder pencil will work, In a pinch you could twist wires and tape. Fixed a $75 trimmer for 8 bucks.
Nate Rash
Reviewed in the United States on December 21, 2024
The "Soldering tabs for easy make battery packs" are useless... And yes, I'm quoting from the listing.The tabs are oriented in a way that only allows for running in parallel. And even if you are trying to run them in parallel, the tabs are not long enough to reach the positive posts. At this point the tabs are in the way and make these practically useless. I would say steer clear and go with another brand. I'm definitely returning these.
GMan
Reviewed in the United States on October 5, 2024
My trusted rechargeable brand-name hand vacuum's NiCd batteries were giving up after over five years of sporadic use. Couldn't find replacement battery packs, thus I purchased these sub-C NiCd tabbed cells and made my own replacement pack.So far they revived my vacuum to as-new condition. The initial charge cycle took 18 hours (as expected considering the cell capacity and charger current rating). Just make sure you use the original NiCd charger - do not mix these up with NiMH cells or chargers!If you are not afraid of building your own battery pack, these NiCd cells are a perfect solution to fix your older appliances.( I also ordered 85mm battery pack heat shrink tubing to securely contain and insulate the packs - the blue tubing that you will find under this search term works perfectly for these size cells.)
Customer
Reviewed in Mexico on October 23, 2024
Excelente opinión del servicio y del producto, que me permitió arreglar mi miniaspiradora en forma fácil y competitiva,
Miguel Godinez
Reviewed in Mexico on April 7, 2024
Excelente ya vienen con carga así que se pueden usar inmediatamente las use para darle vida a un taladro de 9.6volt
FREDDY
Reviewed in Mexico on September 20, 2023
llego en tiempo y forma, buen producto era lo que esperaba
Adrian Garcia
Reviewed in Mexico on September 25, 2022
Funcionó a la perfección
Alejandro Molina
Reviewed in Mexico on November 6, 2022
Lo utilice en una pila de taladro y funcionó muy bien lo recomiendo
Roy the Ice Cream Guy
Reviewed in the United States on June 7, 2019
These were exactly as advertised. I soldered 10 together to make a fresh battery pack for one of my cordless drills, and they seem to work fine.
Recommended Products
