Your cart is empty.
Your cart is empty.Ronny Jesus Campos pachano
Reviewed in the United States on July 3, 2025
Funxiono perfectamente
Nate
Reviewed in the United States on June 23, 2025
Doesn’t connect to the manufacturer pre-wired connection.
Talo0077
Reviewed in the United States on March 17, 2025
Queda muy bien
NAIF ALANBARI
Reviewed in Saudi Arabia on September 29, 2024
سئ
RPD
Reviewed in the United States on January 28, 2023
I installed this in my 2003 tacoma. Only needed to lightly round off the 4 corners and it snaps right in. Orange-ish/ amber color back lighting. Almost matches factory dash lights perfectly.
Miolnir
Reviewed in the United States on February 26, 2022
These switches do not last more than a month or two. The internal mechanism fails after a short time of use. I tried a second one thinking it was just a bad one and nope, the second one failed with the same problem the first one had. I used it to turn on my fog lights, eventually the switch will no longer catch on and hold the circuit on. Save your money and pick something else.
Dave Finstein
Reviewed in the United States on November 23, 2021
Works exactly as designed. This switch works well for after market OEM style fog lights for the 2003-2008 Corolla models.
Mr. Torres
Reviewed in the United States on January 20, 2020
It gets stuck from 90%of the time.
G. Saffer
Reviewed in the United States on April 5, 2020
I bought this so I could control the extra USB ports I've added in my wife's 2006 Highlander. It works fine, but the bezel is not correct for the car. Whether they shipped the incorrect version or the information on the page is wrong, I don't know.The index card that comes with the light and contains the wiring information is a bit confusing.The is the correct wiring,Yellow wire comes from the 12 volt feedBlue wire goes to the load.Red wire is for night time illuminationBlack wire is ground for both the night time illumination and the power on indicator light.It gets a three star rating because it works, but loses two stars because the bezel is wrong and I had to trim the dash to install it. More trimming will be needed to get a better fit. when I have time.
Cédéric lanteigne
Reviewed in Canada on April 2, 2020
First the switch broke at first use it couldn't hold it self. And Warning if used with regular bulbs use a relay. it melted in my dash.. Poor quality
Recommended Products