OK so i have been using this printer for a year now and wanted to leave a review. I have multiple other printers from Elegoo and Anycubic both large and small.... and I havent touched them for a year. This printer is that good. My elegoo Jupiter and my anycubic M3's both max and regular are sitting, cleaned up, covered and basically in storage. I dont even need them anymore. This printer does it all... perfectly...quickly...and most of all hassle free. The heating system is a game changer, and I mean a COMPLETE game changer. My prints have never looked so good. I recently upgraded to the 12k screen for even more wow.. Which is another big thing about this printer. My M3 Max screen went out...do you know how much of a pain the butt it is to fix a broken screen?? This printer on screen change was almost comical compared. They really have some smart folks working for them to design something that is LITERALLY 4 screws and put a new screen in... I mean come on.. The vat just slides into place (make sure you print some new "feet" for the vat on your first prints because I did break one changing out the FEP to a different type. BUT BUT BUT.. dont make your mind up over anything I just said...the thing that should convince you to get one is the CUSTOMER SERVICE........ HOLY SMOKES!! I have never never never never ever ever ever seen customer service like these guys provide. I mean I just barely mentioned my gasket on my Uniformation Ultrasonic cleaner was the old style and they INSTANTLY responded to me on facebook and I had a new one sitting on my doorstep 3 days later..no charge!!! I mean they upgraded my equipment for free... and the staff on the Facebook group is always answering questions and helping anyone out they can. {just wait till you meet Mia!!! she ...is....amazing (and super cute which doesnt hurt things lol... ahh to wish i was 20 years younger and lived in China..)} anyway i digress ... get this printer. I absolutely promise you that it will be the best best best thing you ever spent your hard earned money on. Yeah its a little more pricey but If your in to cheap junk (ahem..anycubic..ahem) you do you boo boo....

This printer is an amazing printer just by looking at reviews and videos of it, but sadly I accidently bought it from this seller and am highly disappointed that I received an already used one, it had scratches on the build plate deep ones at that, the lid was all banged up and didn't open all the way without falling back down, the filter to plug into the back would not fit right, it would be angled which by other reviews and videos it looks like it shouldn't be angled like it was. and the worst and the least! the USB STICK was CORRUPTED and when I restored it the model files were all gone. all in all do not buy from this seller, buy from the actual Uniformation manufacturer.

I bought this printer with the consideration of most other Resin printers of this size on the market. The things that you should know that separate this from the competition -1. This printer is selling for $899 standard at the moment, with a $90 coupon. This puts it in line with the Anycubic M3 Max and the Elegoo Jupiter in terms of price. The size is pretty similar.2. What the other companies don't have is an ecosystem of products to handle prints of this size. The Wash and Cure can hold full size prints from these big machines. Be aware that the wash station holds 7.5L of IPA. This is a ton of IPA. My advice is to wash the print in a bucket with mean green and then run the print in the alcohol so that you do not dirty the alcohol too quickly. The wash also has filters and a drain in the back for easy cleaning, although I haven't reached that point yet. The wash and cure was a major addition to me buying this printer. The price of the wash and cure is a bit, but they are high quality, and there are bundles that are on sale.3. The design differences from other printers on the market. This has a unique build plate, vat and air purifier.The built plate is probably the best part about the GKtwo, and just as unique as the GKone. The build plate top never lowers into the resin, so cleanup is a breeze. I don't know how they do it, but I never have issues with print adhesion. It's leveling system, while more cumbersome than some printers initially, stays level for a long time.The vat allows for much easier clean up as well. The resin gets pushed up to a second level when you are printing, and makes filling the vat while printing a breeze. There is no spout, so that is a downfall of the vat. There also are no screws. The vat slides into place, making it easy to add and remove. It also has a cover, for if you want to store the vat.The filter magnetically attaches to the back and works very well.4. The interior is warmed by the heat generated from the UV array. While not as accurate of a temperature as I would like, the heat causes the vat to warm and the resin to reach optimal temperatures, even if the printer is not in a warm environment.5. The printer comes with extra nFEP and screen protector. If you do have to buy them they are very reasonably priced. Also a replacement screen, god forbid you have to replace, is also very well priced.There are some cons, but not many.1. The lids on the machines need some WD-40 or your lubricant of choice.2. MAKE SURE that you clean the bottom of the vat well. I got something on the bottom, and when putting the vat back it scratched the screen protector, which brings me to the worst experience with the machine. Removing the screen protector the residue left by the glue is so difficult to remove. The best way that I had of removing it was warming it with a heat gun, gently as to not hurt the print screen, and then laying a paper towel doused in IPA along the residue and letting it sit for awhile and then scrubbing it without touching the screen.I have had this for about a month and it has been awesome. I will be adding to the review as I learn more.

I cant find anything wrong with this printer, i owned several different ones but this one is very reliable and accurate, do not waste your money by trying to buy a cheap one. The only issue was the instruction on the levelling video, it is inaccurate, however the technical support team is really good at solving any questions or issues , i am thrilled with their help.The heater is invaluable to get good prints , the printing plate is so well made you can get the models off without a metal scraper hence no scratches or damage to it.