Your cart is empty.
Your cart is empty.Product Description
Dual Electric Cooling Fan Relay Kit with Thermostatic Sensor Switch 185 on 175 Off 40AMP Waterproof Electric Fan Relay Kit Wiring Harness Install
Package List:
- 1x Wiring diagram
- 1x 185'F on-175'F off temperature switch
- 1x 3/8" Thread-In Probe
- 1x 3/8" to 1/2" adapter
- 2x Inline fuse holder
- 2x 20 amp fuse
- 8x Ring terminals
- 4x Fan pigtail connectors 2x 40A relay with wiring harness
Connection Method：
- Red: to 12VDC Positive Battery Terminal
- Coffee: to Fan Positive
- Black: to Ignition
- Grey: to Sending Unit
Specifications:
- Voltage: 12VDC
- Relay: Waterproof 40Amp
- Thread-In Probe: 3/8"
- Adapter: 3/8" to 1/2"
- Length of wire: 90cm/ 35.43 inch
- Type: Cooling Fan Wiring Install kit
- Temperature: Approximately 185'F On - 175'F Off
Brakes
Reviewed in the United States on February 9, 2024
This wire, fuse and rely is designed to make installation a snap. Plug into your fan, wire to power and hook the relay to your temperature sensor and your all set with fused protection. All for a very affordable price
Hippy Bryan
Reviewed in the United States on February 10, 2024
Kit comes complete as described, and I found an extra 20A fuse in each baggie. The fuse holders are not waterproof, only the relay. The plug pushes onto the relay tightly. The wires are 14AWG and more suitable for 10-15 amps, but the relays are 40 amp rated.No instructions included, so refer to the picture in the listing if you're using it for fan control application. I used these for lighting circuits, so didn't use the thermostat switch included, but I'll find a use for the brass 1/2" x 3/8" NPT adapter. I did find it odd that the sensor has a male spade terminal, but only ring crimp connectors of the non-heat shrink style are included.If you plan on adding a fan circuit, this kit might be for you. Supply your own connector(s).
Recommended Products
$37.49
$ 16 .99 $16.99