Your cart is empty.
Your cart is empty. about controller:
voltage：36V/48V/52V/60V/72V universal
current：34A-40A
number of transistors: 15
rated power：1000W-1200W-1500W all can work
1.high -level brake
2.brake light power
3.throttle handle
4.reverse gear
5.low brake
6.hall (5wires)
7.linear brake(Thumb brake)
8.PAS
9.head light/tail light power
10.regenerative brake
11.intelligent recognition
12.LCD
13.ignite
14.XT60 battery
15.phase line
how to connect ？
1.connect the phase line color to color connection
2.connect the hall line,color to color connection
3.connect the battery line(red wire :battery + , black:battery-)
4.connect the controller LCD line,connect the ignition switch（if your throttle not have ignition switch，controller ignition 2 wires need short together）
5.off power,let two intelligent recognition line connect together,open power,the wheel will forward or reverse.
(1.if wheel forward ,Separate the intelligent recognition line.
2.if wheel reverse, Separate the intelligent recognition line. let 2 intelligent recognition lines connect together again,if wheel forward ,Separate the intelligent recognition line.
3.This function allows the controller to intelligently identify the battery voltage and adjust the rotation direction of the motor）
NOTE:when use throttle，intelligent recognition must separate.）
6.other functions can be connected as needed.
