Your cart is empty.
Your cart is empty.Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
djgyamfyahFSS
Reviewed in the United States on March 13, 2021
Failed after 5 years what more can you ask for
Zuhar Zaqib
Reviewed in the United States on September 9, 2019
Fitted perfectly on a Honda Odyssey lx 07
Arm&Hammer
Reviewed in the United States on May 4, 2019
I bought the BA 101-6913 Stabilizer End Links for my 06 Odyssey. I was hearing some dull clunking noise. The original links were 10 years old so I changed them anyway even though they had not failed, one was still stiff the other slightly loose. It did help the sound a bit. Now after 4 years these BA links have totally failed almost coming off its socket. The boot cover dry-rotted and cracked allowing dirt and salt to get in, it quickly deteriorated. So I guess you get what what you pay for. These are half the price of an OEM Honda link but they only last 3-4 years, the original lasted 10 and maybe longer if I left them on. I would suggest OEM, the links on an Odyssey need to have a heavy duty boot and a beefier socket to handle years of pounding. THere are some aftermarket heavy duty ones but they are more than OEM, so might as well get the OEM and change them every decade.
Deven H
Reviewed in the United States on March 30, 2017
The nuts had poor threads. Had to remove and clean (didn't have a tap that thread size), threaded on old link to clean threads, because it was so difficult to try to tighten on the vehicle.
PapaStevey
Reviewed in the United States on February 19, 2017
Links were as good as OEM parts in fit and function. No issues. I tried these first before replacing the more expensive struts. The new links got rid of the "clunk". Replace them in sets.
Jeremiah
Reviewed in the United States on December 13, 2016
This was the correct part number for a 2008 Honda Odyssey (LX, EX, EXL)...they are sealed and require no grease or maintenance...the threaded stud accepts a #6 metric allen key at the end of the stud to aid in installation. I would recommend/buy this product again.
Paul
Reviewed in the United States on December 12, 2016
Wow, I am really surprised at the difference this made in our Odyssey! No more clunk in the front end and the ride has gone from really soft to supportive! Even my wife noticed that the ride was better and the dive in the front end was gone. I bought the sway bar bushings to replace at the same time but the Touring model is 24 not 23 mm. If you have air tools it will make the job a lot easier, If you have hand tools you can use vise grips on the inside boot so it doesn't rotate, soak the threads in PB blaster and use a large hammer to pound on a wrench or ratchet. It's was a major pain to say the least!
SaveThais
Reviewed in the United States on September 17, 2015
These are well built and the lowest cost I could find for my 2006 Honda Odyssey Minivan. They were 1/2" longer than the ones I took out, but since I was changing both that did not cause as issue...the sway bar would be in a slightly different position but the minivan would still ride level. The links come with nylon-insert lock-nuts and the nylon was split and starting to come out of one of the lock-nuts so that when I installed it about 1/3 of the nylon came out and broke off the lock-nut. Again this is not a performance or safety issue since it is proper bolt torque that holds everything together, just something that made it through quality control. The creaky front end noise is gone and now the minivan is quiet going over bumps.
Recommended Products
