Your cart is empty.
Your cart is empty. Aluminum Engine Coolant Thermostat and Housing Assembly - with 2 Sensors and Bypass Hose - Compatible with 2001 - 2005 Ford Explorer Sport Trac 4.0L V6 (Dual Clip-In Style Sensors) From 7/24/2000
Note: ALUMINUM Thermostat Housing Assembly; Dual Clip-In Style; With (2) Sensors and Bypass Hose Kit
Important Note: For Vehicles with Dual Clip Style and 2 Sensors (Included); Upper Housing is Angled to the Right (Passenger) Side; Includes Bypass Hose Kit
Compatible With or Fits:
Note: Fits From 7/24/2000; With 2 Clip-In Style Sensors
- 2001 Ford Explorer Sport Trac 4.0L V6
Note: With 2 Clip-In Style Sensors
- 2002 - 2005 Ford Explorer Sport Trac 4.0L V6
Kurtis jones
Reviewed in the United States on June 13, 2025
So my factory housing unit had split along the seam. Had no choice and why buy a plastic one when you can get this! For the same price. We'll worth it. Everything you need too. Don't bother with replacing sensors or thermostat. Everything all together when it arrives. Just yank old one and slap this baby in. Connect the hoses and good to go.
Monte G Taylor
Reviewed in the United States on January 11, 2025
The part fit just like the original part did, but now won't break like the plastic piece.
Yokosuma
Reviewed in the United States on July 15, 2024
Seems like a good idea (metal vs plastic) but it has an Achilles heal. The smaller tube that seats atop housing is pressed into said housing then sealed with a sort of rtv/plastic. Within a short time it will start to leak. The leak will be ever-so-slow at first but then noticeably faster. It will run down then pool in the engine valley before making it to the ground. This was my second attempt to replace the original plastic thermostat housing with metal ones and both leaked at that tube. I wouldn't plan long trips on a hot day with this ticking time bomb. Also, this remove & replace job is approx. 2.5 hrs and so wasted time/effort. Unless that tube is welded solidly to housing I would NOT RECOMMEND!
Warren
Reviewed in the United States on May 19, 2024
Love this upgrade from the plastic OEM. this kit includes everything you need. A definite must have.
woof
Reviewed in the United States on December 11, 2023
Housing is top notch as far as craftmanship goes and will in my opinion be the final housing I will use for this vehicle. To save a lot of time from installing it a couple of times and patience not too mention wasting antifreeze. And it is a pain to install on a 4.0L ford engine. If you are not installing new sensors get new o rings for the old ones or you are guaranteed to have a leak. Also if reusing the old 2 hoses on top as I did. Get new adjustable hose clamps like the ones that comes with the unit, you will need one for each hose. Especially for the small hose. The old clamps are not strong enough to seal the hoses on the unit since the old hoses may not be malleable enough to properly seal on the inlet spouts. Finally do not use any sealant on the mating surfaces and that they are cleaned up thoroughly. Experience is a harsh teacher.
idcm
Reviewed in the United States on December 7, 2022
As expected, good fit, everything worked.
Alma
Reviewed in the United States on October 25, 2022
Fit like oem, worked well.I would recommend this seller and this product to others.
Gramps
Reviewed in the United States on December 15, 2021
Took only a little more effort the expected. Works perfectly. Now only time will tell.
Recommended Products
