Your cart is empty.
Your cart is empty.Dustin Rhoades
Reviewed in the United States on June 30, 2024
This Rocker/lifters set is wrong for a 2012 Jeep Wrangler JK Pentastar engine!**Do Not Buy**After replacing the entire engine set on an engine that ran perfect; except for a slight tic, and mind you it took roughly 8hrs. I found that there was a check engine light that read p0300 (multiple miss fire) after the job was done, the engine ran extremely rough and "dieseled" very bad. I did a compression check and found cylinders 1,3,4, and 6 failed the leak down test, because the rockers are the wrong size and not allowing the valves to fully seat/close.
Parts do not work with 3.6l v6 pentastar motor
Reviewed in Canada on March 1, 2024
Rocker arms wrong size
Customer
Reviewed in Canada on February 23, 2024
Beware. Confirmed part number prior to order.After installing,car would not start.Tearing down the engine 5 times to figure out why, car finally started and would not run properly.had to tow it to a garage only to find that parts were incorrect.There was zero compression due to improper part installed,when comparing old ones they looked identical. Also ruined my cams and valves. Buyer Beware!Update:After 1 month in the shop, shop confirmed the parts did not fit properly and several valves are now damaged from installing these. Total cost to fix car- $8000 for replacing valves, cam, and installing proper parts. (Valve change requires an engine removal for access to valve housing.) nothing heard from the company for any compensation or assistance.
vitali chaliadzinski
Reviewed in the United States on December 30, 2023
157 / 5,000Translation resultsTranslation resultlifters rare garbage I bought this set in April for my Dodge Grand Caravan 2015 until now the car has been standing and not driving because of them the engine is adjustingI don't recommend it
jennifer Harnett
Reviewed in the United States on December 19, 2023
After installing this and many other parts (worn cam nub) and getting the car back together, we found that we did not have compression in the engine. We thought that we had a crack in the head and tore the vehicle apart for a second time. After a month of work and pulling out hair notice, there is slight variations of the pitch of these rockers. Given the amount of work to do this to your vehicle don’t screw it up with buying parts from this crappy company.
Jennifer Alves
Reviewed in the United States on November 16, 2023
THANK YOU SO MUCH.
MIKE P.
Reviewed in Canada on November 16, 2023
If you needed lifters and rocker arm roller has failed you will need to order a timing chain tensioner bank 2because the filings will end up in the tensioner because it's oil gallery does not end in the oil pan just at the tensioner fyi
al112
Reviewed in the United States on November 12, 2023
The rocket arms doesn’t fit to a Jeep Grand Cherokee 2013 3.6L they are bigger and are to tight. The valves remain open or closed so the engine wont start.The lifter works well.
Linda Armstrong
Reviewed in the United States on October 31, 2023
Rocker Arms not to Spec, left valves open after installation. Vehicle would not start due to no compression.. save your money, had to pay mechanic to tear down 3 times ! Buy from real auto parts house.
Lawrence G Trybus
Reviewed in the United States on October 15, 2023
These had no bad edges and fit the lifters correctly, unlike others that have been reviewed here
Recommended Products