Your cart is empty.
Your cart is empty.Product Description
NEMA23 STEPPER MOTOR
Advantages:
- High-quality motor discs, low inductive reactance of bearings, good responsiveness, and can be directly connected to the load at low speeds without gear reduction in a nearly blocked state.
- Stainless steel shaft, high silicon steel plate, aluminium alloy front and rear end caps, copper enameled wire and other high-end materials and accessories to protect the quality of the product.
- Adjust the current size according to the actual situation, and send out more energy in a compact space.
- Adopting silicone rotor, the motor has high torque and stable output, so it has low noise and longer life.
Motor coil
- The motor coil is made of pure copper enamelled wire, advanced winding technology, uniform arrangement, lower temperature rise of the motor, and no deformation problem for long time running.
Silicon steel rotor
- Adopting high-quality silicon steel material, selecting high-performance silicon steel sheet, greater torque, more stable output.
Parameters:
- Phase: 2 Phase
- Step Angle: 1.8 degree
- Frame Size: 57 x 57 x 112 mm
- Shaft Diameter: 8mm
- Holding Torque: 2.8Nm (425oz.in)
- Phase Resistance: 1.6ohms
- Rated Current/phase: 4.2A
- Rated voltage: 3.6V
- Resistance: 0.86Ω±10%/phase
- Inductance: 4.0mH±20%/phase
- Insulation resistance: 100MQ Min.( DC 500V )
- Rotor inertia: 640g.cm²
- Insulation: B
Small vibration, low noise
The surface of motor rotor is coated with epoxy resin, which seals the rotor as a whole and is cured at high temperature. After the rotor is abraded, it is not easy to keep iron chipping and other processing residues in the tooth grooves, so the structure is stable and does not jam the machine.
Aluminium alloy die-cast end caps & Rigid performance silicon steel sheet
- Aluminium die-casting end caps With higher strength, better precision and more favourable to the heat dissipation of the motor.
- Rigid performance silicon steel sheet. The excellent stator stack design is the motor with more sawing force, higher precision and lower loss.
How to wiring the 4-lead wire
- Stepper motor's Red wire connects to driver's A+ port
- Stepper motor's GREEN wire connects to driver's A- port
- Stepper motor's YELLOW wire connect to driver's B+ port
- Stepper motor's BLUE wire connect to driver's B- port
Use of a variety of scenarios
Stable operation, applicable to a variety of automation equipment and instruments. Such as: 3D printers, medical equipment, robotic arm, cutting machine equipment, lighting stage, mounter, CNC machine tools, all kinds of automation equipment.
$59.64
$ 27 .99 $27.99