Shopping Cart

Your cart is empty.

Your cart is empty.

PCP Air Compressor, 4500PSI/30Mpa Portable PCP Compressor 110V AC/12V DC Air Gun Compressor Scuba Cylinder Compressors with Transformer and Fan for Paintball, Air Rifle

5.0 Write Review
Free shipping on orders over $29.99

$87.02

$ 41 .99 $41.99

In Stock

About this item

  • 【Sturdy and Durable】PCP compressor It is made of high-strength aluminum and stainless steel through the spraying process, which is wear-resistant and shockproof and can be adapted to various outdoor environments.
  • 【Efficient Pumping】A 250W high-performance motor can quickly complete the inflation task, and 0.53qt air can be filled in about 18 minutes at the pressure of 0 to 4500PSI, and about 6 minutes at the pressure of 2900 to 4500PSI, saving your precious time.
  • 【High Adaptability】PCP air compressor Equipped with a transformer and a pair of battery power cables, this machine supports household electricity and 12V car battery power, which is suitable for various environments.
  • 【Portable Design】The compact design(11.81x9.84x9.84in) and humanized handle make it easy to carry and store this product and will not occupy much space.
  • 【Safe and Reliable】A high-power cooling fan (speed: 12500rpm) and multiple cooling holes on the shell can quickly dissipate the heat to ensure stable running and good performance of the machine. The pressure gauge and temperature display allow you to visually monitor the inflation process and avoid safety hazards caused by excessive inflation.


Application

It can quickly fill air bottles (up to 1.06 qt capacity). It fits most PCP airguns, air rifles, and paintball HPA tanks (

First Use Steps

1.Check the AC voltage at the bottom (default 110V).

2.Connect the power supply and air hose.

3.Turn on the cooling fan.

4.Tighten the release valve to the right.

5.Set air pressure.

6.Start the compressor.

7.After inflation, loosen the release valve.

8.Disconnect and save.

Specification

Color: Orange

Process: Spraying

Material: Aluminum, Stainless Steel

Mount Type: Freestanding

Assembly Required: Yes

Power Source: Battery Powered

Noise: 75dB

Power: 250W

Motor Horsepower: 0.75HP

Capacity: Less Than 1L/1.06Qt

Power Supply: 110V AC/12V Car Battery (40+A)

Maximum Air Pressure: 300Bar/4500PSI

Cooling Fan Speed: 12500rpm

Filling Speed: 0.5L/0.53Qt, Takes about 18 Minutes

Connector Size: 8mm/0.315in

Air Compressor Size: 20x17x13.5cm/7.87x6.69x5.31in

Package Size: 30x26x26cm/11.81x10.24x10.24 in

Net Weight: 5.2kg/11.46 lbs

Gross Weight: 7.2kg/15.87 lbs

Package Included

1 x Air Compressor

1 x Transformer

1 x Air Hose

1Pair x Battery Power Cables

1 x English Manual

All Accessories for Use

Notes

1.Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.

2.You need to check the air pressure value yourself.

3.Please confirm whether there are loose fasteners in various parts before use. Please confirm whether the fan operates normally after the machine is started and whether there are any abnormalities in the sound of the machine, such as friction sound, uneven operation sound, and air leakage sound.

4.You need to manually stop the inflation when the air pressure reaches the set point, when it has been inflated for 25 minutes, or when the temperature reaches 185℉. A beep will sound when inflation is complete.

5.After a full load, please keep the cooling fan running for a few minutes and then manually turn it off. The compressor switch and cooling fan switch need to be pressed briefly, not continuously.

6.The process of automotive use is similar to using home, red corresponds to "+" and black corresponds to "-". It is necessary to keep the car started while the compressor is working.

7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.