Shopping Cart

Your cart is empty.

Your cart is empty.

Lawn Mower Deck Belt for Cub Cadet 02000154, 02000154P, Enforcer 48, Z-Force 54 48, Tank Z-Wing 48 and Z-Force Pro 48 and Z-Force Pro 48 54

5.0 Write Review
Free shipping on orders over $29.99

$16.99

$ 6 .99 $6.99

In Stock
  • Replaces OEM numbers Cub Cadet 02000154, 02000154P; Width 1/2" Length 83.5"
  • For Cub Cadet Z-Force 48, Z-Force 54, Enforcer 48, Z-Force Pro 54, Z-Force Pro 48, Tank Z-Wing 48
  • Product advantages: Aramid cores have a much higher strength than steel cores. The special cotton fabric layer is used to ensure high wear resistance and reduce sliding under sudden load.


Product Description

A1

LESIONGO Mower Belts are specially constructed to deliver high performance. Belts are designed to withstand the high temperatures produced on lawn and garden equipment, with consistently good performance and extreme wear resistance, as well as good handling when exposed to oil and dust.

For Cub Cadet Models:

Enforcer 48 (53AH3AGN050)

Enforcer 48 (53AI3AGV750)

Enforcer 48 (53BI3AGV050)

Z-Force 48 (17AF3AGV009)

Z-Force 48 (17AF3AGV010)

Z-Force 48 (17AF3AGV210)

Z-Force 48 (17BF3AGV010)

Z-Force 48 (17BF3AGV010)

Z-Force 48 (17BF3AGV010)

Z-Force 48 (53AA5B6V710)

Z-Force 54 (17BF3AGX010)

Z-Force Pro 48 KH (53BH3AGN050)

Z-Force Pro 54 KH (53BH3AGT050)

Z-Wing 48 (53AI5BBY750)

HOW TO INSTALL THE BELT

HOW TO INSTALL THE BELT

445

Step 1

When replacing the belt, check the pulley bearings to ensure they spin freely, as damaged bearings can increase friction and wear.

33

Step 2

Look for rust or sharp edges on the pulleys, as they can cause damage to the belt and require immediate resolution.

55

Step 3

Clean debris from the pulley grooves to prevent stretching, slippage, or premature belt failure.

356

Step 4

Lastly, inspect the tensioner spring, as a weak spring can lead to belt slippage and increased friction.

TWO TYPES OF THE MOWER BELT

TWO TYPES OF THE MOWER BELT

3336

DECK BELT

The deck belt connects the engine crankshaft to the transaxle pulley to drive the rear wheels.

66

DRIVE BELT

The drive belt connects the crankshaft to the lawn mower blades, causing them to turn.

332

HOW TO ORDER THE CORRECT BELT

Please reference your OEM part number when selecting the belt for your machine. Belt OEM (Original Equipment Manufacturer) part numbers will be listed in your users manual or referenced on the OEM sticker that is on your machine. For riding mowers, the OEM sticker can usually be found under the hood or seat. If you do not have access to your OEM part number, please measure the outside circumference of your existing belt to make sure the dimensions match the belt you are ordering. ALL Lawn and garden belts are determined by their Outside circumference ONLY. Lawn and Garden belts are NOT determined by their diameter or inside diameter. If your belt has snapped, measure the overall length of the belt and that calculation will be the same as your outside circumference measurement. You should also measure the Top Width of your existing belt and match that size to the belt you see online. The 2 most popular belt top width sizes are ( 1/2" ) and ( 5/8"）