Shopping Cart

Your cart is empty.

Your cart is empty.

Front End Suspension Master Rebuild Kit Idler Arm Compatible with Dodge Challenger OEM Spec Replacements (27 Piece Kit)

5.0 Write Review
Free shipping on orders over $29.99

$279.99

$ 99 .00 $99.00

In Stock

1.Size:Years: 1970-1974 - 22 Piece Kit - Red Polyurethane


About this item

  • YEARS: 1970, 1971, 1972, 1973, and 1974
  • MODELS: Compatible with Dodge Challenger
  • HIGH-QUALITY: OEM Spec Replacements
  • INCLUDED IN THE 27 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Links (2 Each), Strut Rod Bushings (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bumpers (2 Each), Lower Control Arm Bumpers (2 Each), Idler Arm
  • ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.


This Kit is constructed using High-Quality OEM spec replacements and is compatible with 1970-1974 Dodge Challengers (Drum and Disc Brake Models). These parts are Factory Design and will only work with Stock Vehicles. This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends (Right and Left), Outer Tie Rod Ends (Right and Left), Tie Rod Sleeves (2 Each), Sway Bar Bolts (2 Each), Sway Bar Bushings (2 Each), Strut Rod Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (2 Each), Upper Control Arm Bumpers (2 Each), Lower Control Arm Bumpers (2 Each), and Idler Arm. This Kit Also Contains The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.