Your cart is empty.
Your cart is empty.Product Description
Frequently Asked Questions:
Q: If screen turned on and blanked when attached to iPhone, what would I do?
A: If the phone baseboard can work normally, you just need to power off the phone, check if every flex cable is good and connected well, reinstall the screen and restart the phone.
Q: Will the phone screen indicate if it is not an original screen?
A: Yes. The issue can be solved by moving the original IC. We provide a free IC removal cable inside the box. This is a challenging task and if the principle chip needs to be replaced, we recommend that you install it under professional guidance, but the display will still work without moving the IC.
Q: Will the iPhone indicate overheating after installation?
A: Please remove the transparent protection film on the back of the screen replacement before installation (The film is only to protect the LCD from damage during transport), otherwise the phone will be hot after installation.
Q: Screen shows white spots in the background, is that the screen broken?
A: No, the white spots will disappear automatically after 30 minutes, the white spots are caused by static electricity, after about 30 minutes, the static electricity disappeared and the white spots will disappear automatically, it is not the screen problem, please be patient, waiting for 30 minutes, then observe.
Q: Why does some screens turn to pink after installation?
A: Please check if the Proximity Sensor flex cable, which is transfered from the old screen, is installed correctly. If it is broken or not installed correctly, the screen will turn to pink after installation.
$35.88
$ 15 .99 $15.99